JDM Nissan Rogue Sport MR20DD 2.0L Engine for 2017–2020 – Compression Tested

Looking for a Nissan Rogue Sport engine for sale to replace a failed, damaged, or high-mileage 2.0L motor? This JDM Nissan MR20DD 2.0L direct-injection engine is imported from Japan and available from J-Spec Auto Sports as a replacement long block for compatible 2017–2020 Nissan Rogue Sport applications.

This particular engine has been compression tested and inspected by J-Spec Auto Sports before sale. It carries engine serial number 219572B and is backed by our 90-day start-up warranty, subject to applicable warranty terms and installation requirements.

The MR20DD belongs to Nissan’s MR-series engine family. It is a naturally aspirated 2.0-liter inline-four featuring DOHC cylinder heads, 16 valves, direct gasoline injection, variable valve timing, and a timing-chain valvetrain.

Most importantly, this engine is intended for the Nissan Rogue Sport, known globally as the Nissan Qashqai. It should not be confused with the larger U.S.-market Nissan Rogue equipped with a different engine.

For a Rogue Sport suffering from internal engine damage, low compression, overheating damage, excessive oil consumption, or complete engine failure, this JDM MR20DD provides an OEM-family replacement option without converting the vehicle to a different engine platform.

MR20DD Engine Specifications

• Engine Code: MR20DD
• Engine Family: Nissan MR Series
• Displacement: 2.0L
• Configuration: Inline 4-cylinder
• Valvetrain: DOHC, 16-valve
• Aspiration: Naturally aspirated
• Fuel System: Direct gasoline injection
• Variable Valve Timing: CVTC
• Timing System: Timing chain
• Fuel Type: Gasoline
• Condition: Used JDM imported engine
• Mileage Range Listed: Approximately 45,000–75,000 miles
• Testing: Compression tested
• Serial Number: 219572B
• Item ID: 54793
• SKU: A3333
• Warranty: 90-day start-up warranty
• Transmission: Not included

Nissan Rogue Sport MR20DD Compatibility

This engine is intended for compatible:

• 2017 Nissan Rogue Sport 2.0L
• 2018 Nissan Rogue Sport 2.0L
• 2019 Nissan Rogue Sport 2.0L
• 2020 Nissan Rogue Sport 2.0L

Chassis / Vehicle Family

• Nissan Rogue Sport
• Nissan Qashqai
• J11 / J11B platform
• MR20DD 2.0L gasoline engine

IMPORTANT: Rogue Sport vs. Rogue

This distinction is critical.

This engine fits compatible Nissan Rogue SPORT applications.

It is not intended as a replacement for the larger U.S.-market Nissan Rogue equipped with the QR25DE 2.5L engine.

The names are similar, but these are different vehicles with different engine applications.

Before purchasing, verify that your vehicle is a:

Nissan Rogue Sport + 2.0L + MR20DD

If your vehicle is the larger Rogue with a 2.5L QR25DE, this is not the correct replacement engine.

If you are unsure which engine you have, contact J-Spec Auto Sports with your VIN, year, make, model, and drivetrain before ordering.

JDM vs. USDM MR20DD Fitment

Matching the MR20DD engine code is important. However, a Japanese-market engine and a U.S.-market complete engine assembly can have differences in external components.

Depending on application, differences may include:

• Sensors
• Wiring connections
• Intake components
• Throttle body
• High-pressure fuel-system components
• Fuel rail components
• Accessories
• Brackets
• Engine mounts
• Exhaust components
• Emissions equipment
• Cooling-system connections
• Transmission-related hardware

For this reason, professional installers should compare the replacement JDM engine directly with the original USDM engine before installation.

When necessary, transfer the appropriate original USDM components to the JDM long block.

FWD and AWD Applications

The Nissan Rogue Sport was available in front-wheel-drive and all-wheel-drive configurations.

The replacement engine may provide the appropriate long-block foundation for compatible FWD and AWD applications. However, drivetrain-specific components are not automatically included with the engine.

Always verify:

• Engine mounts and brackets
• Transmission connections
• Flexplate-related components
• Sensors
• Wiring
• AWD-related external components

Do not assume every external component transfers between configurations without comparison.

What Is Included?

This listing is for the MR20DD long-block engine assembly shown in the actual product photographs.

The engine may arrive with attached components such as:

• Valve cover
• Intake manifold
• Fuel rail
• Ignition coils
• Sensors
• Brackets
• Other components visible in the photos

Attached accessories should be considered convenience items unless specifically stated otherwise.

Unless specifically included in the listing:

• Transmission is not included
• ECU/PCM is not included
• USDM engine wiring harness is not included
• Vehicle-specific emissions components are not included

Review the actual engine photographs carefully before purchasing.

Why Choose This JDM MR20DD Engine?

Replacing a complete engine can be expensive. Rebuilding a damaged engine may require machine-shop work, replacement internal components, and significant labor.

A quality JDM MR20DD gives Rogue Sport owners and repair shops another option while retaining the original Nissan MR20DD engine architecture.

This particular engine offers:

• Genuine Nissan MR20DD engine family
• Imported from Japan
• Compression tested
• Actual engine serial number
• Direct-injection technology
• Timing-chain design
• 90-day start-up warranty
• Nationwide freight shipping
• Fitment assistance from J-Spec Auto Sports

MR20DD Pre-Installation Inspection

A replacement engine should never simply be removed from the pallet and installed without inspection.

Because the engine is already outside the vehicle, this is the best time to inspect accessible maintenance and wear components.

Inspect the Timing Chain System

The MR20DD uses a timing-chain valvetrain.

Before installation, inspect:

• Timing chain
• Timing-chain guides
• Timing-chain tensioner
• Camshaft sprockets
• Variable-valve-timing components
• Front-cover sealing areas

Replace components that show excessive wear or fail inspection.

Inspect the Direct-Injection Fuel System

The MR20DD uses direct gasoline injection.

Unlike a conventional port-injection engine, direct injection operates with a high-pressure fuel system.

Before installation, inspect the appropriate:

• High-pressure fuel pump components
• Fuel rail
• Fuel connections
• Injectors and related components
• Fuel-system seals
• Electrical connections

Follow the appropriate Nissan service procedure whenever opening or servicing high-pressure fuel-system components.

If JDM and USDM fuel-system components differ, transfer the correct original components as required.

Recommended MR20DD Pre-Installation Service

Before installing the replacement engine, J-Spec Auto Sports recommends that a qualified technician:

• Compare the JDM and USDM engines side by side.
• Inspect accessible gaskets and seals.
• Inspect the valve cover gasket.
• Inspect front and rear main seal areas.
• Inspect the timing chain.
• Inspect timing-chain guides and tensioner.
• Inspect variable-valve-timing components.
• Inspect the water pump.
• Inspect the thermostat and cooling-system components.
• Inspect the direct-injection fuel system.
• Inspect or replace spark plugs as necessary.
• Inspect ignition coils and electrical connectors.
• Inspect PCV-related components.
• Transfer required USDM sensors and accessories.
• Install fresh engine oil and a quality oil filter.
• Prime the engine lubrication system before startup.
• Refill with the correct coolant.
• Thoroughly bleed trapped air from the cooling system.

Performing this work before installation can help prevent avoidable labor later.

Critical MR20DD First-Startup Procedure

Proper initial startup is one of the most important parts of a replacement-engine installation.

Before attempting to start the engine, verify:

• Correct engine-oil level
• Correct coolant level
• Electrical grounds
• Crankshaft and camshaft sensor connections
• Fuel-system connections
• High-pressure fuel connections
• Intake connections
• Cooling-system hoses
• Vacuum connections
• Transmission connections
• Engine mounts

Prime the Lubrication System Before Startup

Do not immediately start a replacement engine and allow it to operate normally without first establishing proper lubrication.

Prime the engine lubrication system using the appropriate service procedure before normal startup.

The objective is to establish oil circulation before placing the replacement engine under normal operating load.

Monitor the Engine Immediately After Startup

During initial startup, closely monitor:

• Oil-pressure warning indicator
• Oil leaks
• Coolant leaks
• Fuel leaks
• High-pressure fuel-system leaks
• Abnormal timing-chain noise
• Abnormal engine noise
• Idle quality
• Engine temperature
• Check-engine light
• Diagnostic trouble codes

Immediately shut the engine down if abnormal oil pressure, overheating, severe leakage, or significant mechanical noise occurs.

Properly Bleed the Cooling System

After installation, fill the cooling system with the correct coolant and thoroughly remove trapped air according to the appropriate Nissan service procedure.

Trapped air can interfere with coolant circulation and contribute to overheating.

Once the engine reaches operating temperature and later cools, recheck:

• Engine oil level
• Coolant level
• Hose connections
• Fuel connections
• Oil leaks
• Coolant leaks

Complete a diagnostic scan before road testing the vehicle.

Professional Installation Recommended

J-Spec Auto Sports recommends installation by a qualified technician familiar with Nissan MR-series direct-injection engines.

The installer should compare the original engine with the JDM replacement and transfer required USDM-specific sensors, accessories, fuel-system components, brackets, and emissions equipment.

Any required electronic throttle, idle, crankshaft/camshaft, or other relearn procedures should be completed according to the appropriate Nissan service information.

Nationwide Shipping From J-Spec Auto Sports

J-Spec Auto Sports ships JDM Nissan engines and transmissions throughout the continental United States from Richmond, Virginia.

Engines normally ship securely palletized by freight.

Commercial delivery locations with loading equipment are generally the easiest option. Lift-gate or residential delivery may also be available depending on destination and carrier requirements.

Local pickup is available from J-Spec Auto Sports.

Frequently Asked Questions About the MR20DD Engine

What is the Nissan MR20DD?

The MR20DD is a 2.0-liter naturally aspirated inline-four engine from Nissan’s MR engine family. It uses DOHC cylinder heads, 16 valves, direct gasoline injection, variable valve timing, and a timing-chain valvetrain.

Does the 2017–2020 Nissan Rogue Sport use the MR20DD?

Yes. The U.S.-market Nissan Rogue Sport 2.0L uses the MR20DD engine family.

Is the Nissan Rogue Sport the same as the Nissan Rogue?

No. They are different vehicles. The Rogue Sport is the smaller crossover related to the global Nissan Qashqai.

Will this engine fit a regular Nissan Rogue?

No, not if your U.S.-market Rogue uses the QR25DE 2.5L engine.

This listing targets the 2.0L MR20DD Nissan Rogue Sport.

Is this an MR20DD or MR20DE?

This engine is the MR20DD.

The MR20DD uses direct fuel injection and should not be confused with the older MR20DE engine designation.

What is the difference between MR20DD and MR20DE?

Both belong to Nissan’s MR engine family, but they are different engine variants. One major distinction is that the MR20DD uses direct fuel injection. Do not assume that MR20DE and MR20DD engines are interchangeable.

Does the MR20DD use direct injection?

Yes. The MR20DD uses a direct gasoline injection system.

Does the MR20DD use a timing belt?

No. The MR20DD uses a timing chain.

Should I inspect the timing chain before installation?

Yes. Inspect the timing chain, guides, tensioner, sprockets, and related variable-valve-timing components before installing a used replacement engine.

Should I replace gaskets and seals before installation?

Inspect accessible gaskets and seals before installation. Addressing leakage while the engine is outside the vehicle can save substantial labor later.

Should I inspect the water pump?

Yes. Inspect the water pump, thermostat, hoses, and related cooling-system components before installation.

Should I replace the spark plugs?

Inspect the spark plugs and replace them when necessary. Also inspect the ignition coils, boots, and electrical connectors.

Can I reuse my original USDM components?

Yes. Transferring selected original USDM sensors, accessories, fuel-system components, brackets, and other external parts is common when installing a JDM engine.

Will this engine work with FWD and AWD Rogue Sport models?

The MR20DD engine family was used in compatible Rogue Sport configurations, but drivetrain-specific external components should be verified before installation.

Is the CVT included?

No. This listing is for the engine assembly only unless specifically stated otherwise. The CVT transmission is not included.

Should I prime the MR20DD before startup?

Yes. Proper lubrication is critical during initial startup. Prime the lubrication system using the appropriate service procedure before normal operation.

Does the cooling system need to be bled?

Yes. Properly fill and bleed the cooling system after installation to remove trapped air and help prevent overheating.

Is this engine compression tested?

Yes. This particular engine is listed as compression tested by J-Spec Auto Sports.

What is the mileage?

This particular inventory unit is currently listed in the approximately 45,000–75,000-mile range.

Does this engine have a warranty?

This engine is backed by a 90-day J-Spec Auto start-up warranty, subject to applicable warranty terms and installation requirements.

Can J-Spec Auto Sports ship this engine?

Yes. Nationwide freight shipping is available throughout the continental United States. Local pickup is also available from J-Spec Auto Sports in Virginia.

Buy a JDM Nissan Rogue Sport MR20DD Engine

If you are searching for a Nissan Rogue Sport engine for sale, MR20DD engine for sale, or 2017–2020 Rogue Sport 2.0L replacement engine, this compression-tested JDM engine provides an OEM-family replacement option for compatible applications.

With compression testing, actual inventory identification, a 90-day start-up warranty, nationwide shipping, and fitment assistance from an experienced JDM engine supplier, J-Spec Auto Sports gives buyers the information they need to make a more confident purchase.

Contact J-Spec Auto Sports with your VIN, model year, drivetrain, and original engine information if you need help confirming compatibility before ordering.