JDM 2007–2012 Nissan Sentra RE0F10A JF011E CVT Transmission – 2.0L MR20DE

Replace your slipping, damaged, or failed CVT with a low-mileage JDM Nissan Sentra CVT transmission from J-Spec Auto Sports.

This transmission fits compatible 2007–2012 Nissan Sentra models with the 2.0L MR20DE four-cylinder engine and CVT drivetrain. Nissan identifies this CVT family as the RE0F10A, while Jatco commonly identifies the transmission family as the JF011E.

J-Spec Auto Sports imports this transmission directly from Japan. In addition, our team inspects the unit before sale and provides actual product photos so you can compare it with your original CVT.

Because Nissan used different transmissions with different engines and applications, always verify your original transmission, connectors, sensors, and vehicle information before ordering.

Quick Details

• Vehicle: Nissan Sentra
• Model Years: 2007–2012
• Engine: 2.0L MR20DE
• Transmission: Continuously Variable Transmission / CVT
• Nissan Transmission Code: RE0F10A
• Jatco Family: JF011E
• Drivetrain: Front-Wheel Drive / FWD
• Condition: Used JDM / Low Mileage
• Origin: Japan
• Item ID: 50708
• SKU: AT.20 MR20 CVT
• Photos: Actual Product Photos
• Warranty: 90 Days
• Shipping: Nationwide Freight Shipping
• Installation: Affordable Installation Available
• Local Pickup: Henrico / Richmond, Virginia

Nissan Sentra RE0F10A / JF011E CVT Specifications

Nissan paired the 2.0L MR20DE engine with the RE0F10A continuously variable transmission in compatible Sentra applications.

Unlike a conventional automatic transmission with a fixed number of forward gears, a CVT continuously changes its operating ratio. As a result, the transmission can adjust engine speed according to acceleration, vehicle speed, and driving conditions.

Technical Information

Nissan Transmission Code: RE0F10A
Jatco Transmission Family: JF011E
Transmission Type: CVT
Engine: 2.0L MR20DE
Engine Configuration: Inline 4-Cylinder
Drivetrain: FWD
Vehicle: Nissan Sentra
Recommended CVT Fluid: Genuine Nissan CVT Fluid NS-2
Condition: Used OEM/JDM
Origin: Japan

For the MR20DE application, Nissan service information lists a CVT ratio range of approximately 2.349 to 0.394, with a reverse ratio of 1.750.

Vehicle Compatibility

This JDM Nissan CVT fits compatible 2007–2012 Sentra models equipped with the 2.0L MR20DE engine and matching CVT configuration.

2007 Nissan Sentra

Compatible applications use the 2.0L MR20DE engine with the matching continuously variable transmission.

2008 Nissan Sentra

This transmission can fit compatible 2008 Sentra 2.0L CVT applications. However, compare all connectors and transmission identification before installation.

2009 Nissan Sentra

Compatible 2009 applications use the MR20DE 2.0L engine and matching CVT drivetrain.

2010 Nissan Sentra

Nissan service information identifies the MR20DE CVT application as the RE0F10A. Therefore, verify that your original transmission matches this configuration before ordering.

2011 Nissan Sentra

This JDM CVT fits compatible 2011 Sentra 2.0L applications with the matching transmission configuration.

2012 Nissan Sentra

Compatible 2012 Sentra 2.0L CVT models may use this transmission family. Nevertheless, always confirm the original transmission and connections before purchase.

Important: 2.0L vs. 2.5L Sentra Transmission

Nissan offered different engine and drivetrain configurations during the 2007–2012 Sentra generation.

This listing specifically targets the 2.0L MR20DE application.

Therefore, do not assume this transmission will replace a CVT or transmission from a 2.5L QR25DE Sentra SE-R application.

Before ordering, confirm:

• Engine size
• Engine code
• Transmission type
• Transmission identification
• Electrical connectors
• Sensors
• Cooler connections
• Axle connections
• Vehicle production information

Matching these items before installation reduces the chance of ordering an incompatible transmission.

RE0F10A vs. JF011E – What Do the Codes Mean?

Customers often see both RE0F10A and JF011E while searching for a Nissan Sentra CVT.

RE0F10A represents Nissan’s transmission designation for this CVT family. Meanwhile, JF011E identifies the related Jatco transmission family.

Although these names may refer to the same general CVT family, not every JF011E transmission from another Nissan, Mitsubishi, Jeep, Dodge, or other application will directly interchange with your Sentra.

Different applications can use different:

• Valve bodies
• Calibration
• Sensors
• Electrical connectors
• Gear or final-drive configurations
• Cases
• Mounting points
• Internal components

For that reason, do not buy a replacement CVT based only on the term JF011E.

Always match the complete vehicle and transmission application.

JDM-to-USDM Fitment

This transmission came from a Japanese-market vehicle.

Although the core CVT may work with compatible U.S.-market Sentra applications, some external components can differ. Therefore, compare the JDM transmission directly with your original USDM unit before installation.

Check:

• Transmission case
• Bellhousing
• Electrical connectors
• Sensors
• Valve body connections
• Wiring
• Transmission mounts
• Axle connections
• Cooler-line fittings
• Range switch
• Speed-related sensors

When necessary, transfer compatible external components from your original USDM transmission.

Most importantly, do not force connectors or modify the replacement CVT before confirming compatibility.

What Is Included?

The sale includes the actual Nissan Sentra CVT shown in the product photographs.

Depending on the individual unit, attached components may include:

• RE0F10A / JF011E CVT assembly
• Transmission housing
• Internal CVT components
• Valve body
• Factory sensors that remain attached
• Solenoids that remain attached
• Electrical connectors
• Torque converter when pictured or specifically stated

Please examine every product photo before ordering.

J-Spec Auto Sports only guarantees components shown in the actual photos or specifically listed as included.

Important CVT Installation Procedure

Correct installation matters with any automatic transmission. However, it becomes especially important with a replacement CVT.

Contamination, incorrect fluid, unresolved electrical problems, or improper setup can quickly damage a replacement transmission.

Therefore, follow proper installation procedures and correct the cause of the original failure before operating the replacement CVT.

Diagnose Why the Original CVT Failed

First, determine why the original transmission failed.

Do not assume every Sentra CVT problem comes from internal mechanical damage.

For example, problems can involve:

• Valve body
• Solenoids
• Stepper motor
• Sensors
• Wiring
• Transmission overheating
• Fluid deterioration
• Cooler restrictions
• Low fluid level
• Control-system faults
• Internal belt or pulley damage

Correcting the original problem helps protect the replacement transmission.

Flush the CVT Cooler and Transmission Lines

Thoroughly clean the transmission cooler and cooler lines before connecting the replacement CVT.

A failed CVT can circulate metal particles and contaminated fluid throughout the cooling system.

Consequently, debris left inside the cooler or lines can immediately enter the replacement transmission.

For that reason, flush the system thoroughly. If a cooler cannot be properly cleaned, replace it.

Do not skip this step.

Use Genuine Nissan NS-2 CVT Fluid

For this RE0F10A application, use Genuine Nissan CVT Fluid NS-2 or the exact fluid specification required by Nissan for the vehicle and transmission.

Nissan specifically warns against mixing incompatible CVT fluids.

Therefore, never fill this transmission with conventional automatic transmission fluid.

Likewise, avoid using a generic fluid simply because its label claims broad compatibility.

CVTs depend heavily on the correct fluid characteristics for pulley operation, lubrication, cooling, and hydraulic control.

Do Not Reuse Old CVT Fluid

Always install the replacement transmission with fresh, correct-specification CVT fluid.

Old fluid may contain metal particles, friction material, or other contamination from the failed transmission.

As a result, reusing contaminated fluid can shorten the life of the replacement CVT.

Inspect the Torque Converter

Before installation, inspect the torque converter and confirm compatibility.

Also make sure the converter fully seats into the transmission before mating the CVT to the engine.

Improper torque-converter installation can damage the transmission pump during initial startup.

Inspect and Replace Accessible Seals

Check accessible transmission seals before installation.

Pay particular attention to axle seals and other areas that would require significant labor to reach after installing the transmission.

If a seal shows leakage or deterioration, replace it now.

Check the CVT Cooler System

Proper cooling plays an important role in CVT operation.

Therefore, inspect the cooler circuit for:

• Restrictions
• Damaged lines
• Leaks
• Contamination
• Poor flow
• Kinked hoses

Correct any problem before operating the replacement transmission.

Scan the Vehicle Before Installation

Use a Nissan-compatible scan tool to check the vehicle for diagnostic trouble codes before removing the original transmission.

Record the codes rather than immediately clearing them.

This information can help identify problems with the valve body, sensors, wiring, engine controls, or other systems.

After installation, scan the vehicle again.

CVT Initialization and Relearn

After installing a replacement CVT, the vehicle may require initialization, calibration, or relearn procedures.

Depending on the transmission, valve body, TCM, and vehicle configuration, Nissan-compatible diagnostic equipment may be necessary.

Therefore, do not assume that installing the transmission mechanically completes the repair.

Follow the appropriate Nissan service procedure for the vehicle.

Verify CVT Fluid Level Correctly

Correct CVT fluid level remains essential.

After installation, add the proper amount of NS-2 fluid according to Nissan service procedures.

Next, cycle the transmission through the appropriate selector positions.

Then check the fluid under the specified operating conditions.

Finally, inspect the transmission, cooler lines, and axle seals for leaks.

Initial Startup

Before driving the vehicle, allow the engine and transmission to operate while checking for:

• Fluid leaks
• Warning lights
• Abnormal noises
• Delayed engagement
• Diagnostic trouble codes

Next, confirm normal engagement into Drive and Reverse.

If anything appears abnormal, stop and diagnose the problem before road testing.

Initial Road Test

Begin the road test gently.

During the test, monitor:

• Drive engagement
• Reverse engagement
• Smooth acceleration
• Engine RPM behavior
• CVT response
• Warning lights
• Abnormal noises
• Vibration or shudder
• Transmission temperature
• Fluid leaks

Avoid aggressive acceleration until you confirm normal operation.

Afterward, recheck the vehicle for leaks and diagnostic codes.

Signs Your Nissan Sentra CVT May Be Failing

Common symptoms include:

• CVT slipping
• Shuddering
• Delayed engagement
• RPM flare
• Poor acceleration
• Whining noise
• Overheating
• Limp mode
• Transmission warning lights
• Abnormal vibration
• Fluid leaks
• Diagnostic trouble codes

However, these symptoms do not automatically mean the complete CVT needs replacement.

For example, a valve-body problem, sensor fault, wiring issue, low fluid level, or cooling problem can produce similar symptoms.

Therefore, diagnose the vehicle before purchasing a replacement transmission.

Why Choose a JDM Nissan Sentra CVT?

A low-mileage Japanese-import transmission can provide an OEM-based alternative to rebuilding a high-mileage failed CVT.

Key benefits include:

• Genuine OEM/JDM transmission
• Low-mileage Japanese donor unit
• MR20DE application
• RE0F10A / JF011E CVT family
• Actual product photos
• Inspection before sale
• 90-day warranty
• Nationwide shipping
• Installation available

In addition, purchasing an actual inventory unit allows you to compare the transmission with your original before installation.

Why Buy From J-Spec Auto Sports?

J-Spec Auto Sports has specialized in Japanese engines, transmissions, and automotive parts for more than 20 years.

Our team supplies approximately 100 engines and transmissions per month to repair facilities, enthusiasts, and vehicle owners throughout the United States.

Rather than operating as a general salvage yard, we focus on Japanese engines, transmissions, and drivetrain components.

Actual Product Photos

We provide actual inventory photos whenever possible.

As a result, customers can examine the transmission they plan to purchase instead of relying solely on generic stock images.

Individual Inventory Identification

Each transmission receives inventory identification so our team can track the actual unit.

This listing carries Item ID 50708 and SKU AT.20 MR20 CVT.

Inspected JDM Inventory

Our team inspects drivetrain inventory before offering it for sale.

Furthermore, J-Spec Auto Sports sources premium-quality engines and transmissions directly from Japan.

Affordable Installation Available

J-Spec Auto Sports also offers installation services for customers who want professional replacement assistance.

Contact us for installation availability, pricing, and scheduling.

Nationwide Shipping

We ship JDM engines, transmissions, and automotive parts throughout the continental United States.

Therefore, customers nationwide can purchase this Nissan Sentra CVT even if they cannot visit our Virginia facility.

Local Virginia Pickup

Local pickup is available from J-Spec Auto Sports in Henrico, Virginia.

Customers from Richmond, Central Virginia, Northern Virginia, Maryland, Washington D.C., and surrounding areas can also arrange pickup or ask about installation.

Shipping

J-Spec Auto Sports can prepare this Nissan Sentra CVT for freight shipment throughout the continental United States.

Shipping costs depend on:

• Destination ZIP code
• Commercial or residential delivery
• Liftgate requirements
• Freight-terminal availability
• Delivery location

Before accepting the shipment, inspect the transmission and packaging for visible freight damage.

If damage exists, document it with the carrier immediately.

90-Day Warranty

J-Spec Auto Sports backs this Nissan Sentra CVT with a 90-day limited warranty, subject to our current warranty terms and installation requirements.

For that reason, review the complete warranty policy before installation.

In addition, keep receipts for CVT fluid, seals, cooler service, installation, and related maintenance.

Frequently Asked Questions

What CVT does a 2007–2012 Nissan Sentra 2.0L use?

Compatible 2.0L MR20DE Sentra models use the RE0F10A CVT family. Jatco also identifies the related transmission family as JF011E.

What is the difference between RE0F10A and JF011E?

RE0F10A is Nissan’s designation for this CVT family, while JF011E is the related Jatco designation. However, application-specific differences can exist, so do not assume every JF011E directly fits a Nissan Sentra.

Will this CVT fit a 2007 Nissan Sentra?

It fits compatible 2007 Nissan Sentra 2.0L MR20DE models with the matching CVT configuration. Verify the original transmission and connectors before ordering.

Will it fit a 2008 Nissan Sentra?

It fits compatible 2008 Sentra 2.0L CVT applications. Nevertheless, compare your original transmission with the JDM replacement before installation.

Will it fit a 2009 Nissan Sentra?

Compatible 2009 Nissan Sentra 2.0L MR20DE CVT models may use this transmission. Confirm the transmission configuration before purchasing.

Will it fit a 2010 Nissan Sentra?

Yes, this transmission family applies to compatible 2010 Sentra 2.0L MR20DE CVT models. However, always verify fitment before installation.

Will it fit a 2011 Nissan Sentra?

It fits compatible 2011 Sentra 2.0L models with the matching RE0F10A CVT configuration.

Will it fit a 2012 Nissan Sentra?

Compatible 2012 Sentra 2.0L CVT applications may use this transmission family. Verify your original transmission and connections before ordering.

Will this transmission fit a Sentra SE-R 2.5L?

Do not assume so. The 2.5L QR25DE application differs from the 2.0L MR20DE application. Therefore, verify the complete transmission identification before purchasing.

What CVT fluid does this transmission use?

Nissan service information specifies Genuine Nissan CVT Fluid NS-2 for the RE0F10A MR20DE application.

Can I use regular automatic transmission fluid?

No. A CVT requires the correct CVT-specific fluid. Conventional automatic transmission fluid should not replace the required Nissan CVT fluid.

Should I flush the transmission cooler before installation?

Yes. Thoroughly clean the cooler and transmission lines before installing the replacement CVT. Otherwise, debris from the failed transmission can contaminate the replacement unit.

Can I reuse the old CVT fluid?

No. Use fresh fluid that meets the correct Nissan specification.

Does the CVT need a relearn after installation?

The vehicle may require initialization, calibration, or relearn procedures depending on the repair and components used. Follow the appropriate Nissan service procedure and use compatible diagnostic equipment when necessary.

Do I need to transfer components from my original transmission?

Possibly. JDM-to-USDM differences may require transferring compatible sensors, brackets, switches, or other external components.

Is this transmission rebuilt?

No, unless the listing specifically states otherwise. This unit is a used, low-mileage JDM/OEM transmission imported from Japan.

Does this CVT come with a warranty?

Yes. J-Spec Auto Sports provides a 90-day limited warranty, subject to current warranty terms.

Do you offer installation?

Yes. Affordable installation is available. Contact J-Spec Auto Sports for current installation pricing and scheduling.

Do you ship Nissan Sentra transmissions nationwide?

Yes. We ship transmissions throughout the continental United States.

Can I pick it up locally?

Yes. Local pickup is available from J-Spec Auto Sports in Henrico, Virginia.

How can I verify fitment before ordering?

Provide your vehicle year, VIN, engine size, original transmission information, and clear photos of the transmission and electrical connectors.

For additional accuracy, compare the transmission case, sensors, connectors, axle connections, and cooler fittings.

Order Your JDM Nissan Sentra CVT Transmission

If your 2007–2012 Nissan Sentra needs a replacement CVT, this low-mileage JDM RE0F10A / JF011E transmission provides an OEM-based replacement option for compatible 2.0L MR20DE applications.

J-Spec Auto Sports provides actual product photos, inspected JDM inventory, nationwide shipping, affordable installation, and a 90-day limited warranty.

Only one unit is currently available. Order online or contact J-Spec Auto Sports for fitment assistance before purchasing.