Subaru Forester 2.5XT TY755VB5BA 5-Speed with 4.44 LSD R160

Finding a healthy Subaru 5-speed with the right ratio and a matching rear diff can take weeks. This JDM Subaru TY755VB5BA transmission saves you the hunt. It’s the 5-speed manual from the turbocharged Forester 2.5XT, with a 4.44 final drive. Even better, it comes with the matching R160 limited-slip rear differential. As a result, you get a ratio-matched AWD drivetrain in one purchase.

Why the Matching R160 LSD Matters

On an all-wheel-drive Subaru, the front and rear final drive ratios must match. Otherwise, the drivetrain binds and the center differential wears out quickly. Because this package includes a 4.44 R160 rear diff, the ratios already match. Moreover, the limited-slip rear diff improves traction when accelerating out of corners and on slippery roads.

Pull-Type Clutch: What You Need

This TY755VB5BA is a pull-type transmission. Therefore, it needs a pull-type clutch, release bearing and clutch fork. If your car currently uses a push-type setup, plan to change those parts during the swap. Not sure which type you have? Send us your VIN, and we’ll tell you before you buy.

Applications

• 2004–2005 Subaru Forester XT 5-speed (US), with the matching 4.44 rear diff
• JDM 2003–2005 Forester 2.5XT
• 2002–2007 WRX builds using a 4.44 rear diff, with the correct pull-type clutch parts

Because the speedometer is calibrated to your final drive, it may read slightly differently if you change ratios. For background, see the Subaru Forester overview.

Why Buy JDM?

JDM drivetrain parts often come from lower-mileage cars, thanks to Japan’s strict shaken inspection rules. In addition, a used JDM 5-speed costs far less than a rebuilt unit.

Installation Tips

1. Fill the transmission and rear diff with fresh gear oil of the correct grade.
2. Install a pull-type clutch kit, release bearing and fork, and resurface or replace the flywheel.
3. Inspect the transmission and rear diff mounts.
4. Check the axles and CV boots, and replace any that are worn or torn.

Professional Installation Available

Want it done right the first time? J-Spec Auto Sports installs the engines, transmissions and parts we sell at our shop in Henrico, Virginia, near Richmond. We handle Subaru 5-speed swaps regularly, including pull-type clutch conversions and rear diff installs. To get a quote or book a time, schedule an appointment or call 866-683-3747.

Shipping and Warranty

This TY755VB5BA package includes a 30-day warranty. We drain it, cap it and strap it to a pallet, then ship it by freight anywhere in the continental US. Alternatively, local pickup is available in Henrico, VA.

FAQ

Is the rear differential included?
Yes. It comes with the matching 4.44 R160 limited-slip rear differential.

Is it push type or pull type?
Pull type. You’ll need a pull-type clutch, release bearing and fork.

Will it fit my 2005 Forester XT?
Yes, with the matching 4.44 rear diff and the correct pull-type clutch parts. Send us your VIN to confirm.

Can I use it in my WRX?
Yes, in 2002–2007 WRX builds, as long as you run the included 4.44 rear diff and a pull-type clutch setup.

Is there a warranty?
Yes, 30 days.

Can you install it?
Yes, at our Henrico, VA shop. Call 866-683-3747.