JDM 2013–2014 Subaru Legacy Sedan CVT, TR580FHDAA

By 2013, Subaru had moved the Legacy to the newer FB25 engine, and this TR580FHDAA Lineartronic CVT came with it. If your Legacy now shudders, whines or slips, a replacement often makes more sense than a costly rebuild. This JDM 2013–2014 Legacy CVT is a genuine Subaru unit for the 2.5L sedan with all-wheel drive. As a result, it gets your car back on the road for far less.

Common CVT Warning Signs

• Judder or shudder when accelerating from a stop
• A whine or drone that rises with road speed
• Slipping, or revs climbing without the car speeding up
• A flashing AWD light, check-engine light or limp mode

Match the Code and Final Drive

Subaru used several TR580 versions, and each can have a different final drive ratio. On an all-wheel-drive Subaru, the front and rear ratios must match, or the drivetrain can be damaged. Therefore, compare the code tag on your current CVT with TR580FHDAA before you order. Alternatively, send us your VIN, and we’ll confirm the match for you.

Fitment

• JDM 2013–2014 Subaru Legacy sedan, 2.5L FB25, AWD
• US 2013–2014 Legacy 2.5i and Outback 2.5i: confirm with the code and final drive, or your VIN
• Not for 3.6R models, manual-transmission cars or 2010–2012 EJ253 models

For background, see the fifth-generation Subaru Legacy overview.

Why a JDM CVT?

JDM transmissions often come from lower-mileage cars, since Japan’s strict shaken inspection rules push many owners to retire their cars early. In addition, a used JDM CVT costs far less than a new one and installs in about a day.

After Installation

1. Fill only with genuine Subaru CVT fluid, to the correct level.
2. Flush the cooler lines, especially if your old CVT failed internally.
3. Run the CVT learning procedure with a Subaru-capable scan tool.
4. Road test the car and check for codes.

Professional Installation Available

Want it done right the first time? J-Spec Auto Sports installs the engines, transmissions and parts we sell at our shop in Henrico, Virginia, near Richmond. We replace Subaru CVTs regularly, so fluid, learning and road testing are part of every job. To get a quote or book a time, schedule an appointment or call 866-683-3747.

Shipping

We drain this CVT, cap it and strap it to a pallet, then ship it by freight anywhere in the continental US. Alternatively, local pickup is available in Henrico, VA. For questions, call 866-683-3747.

FAQ

Will this fit my 2014 Legacy 2.5i sedan?
Match the code and final drive on your current CVT, or send us your VIN, and we’ll confirm.

Will it fit my 2012 Legacy?
No. The 2010–2012 Legacy uses the EJ253 with a different CVT.

Why does the final drive matter?
On AWD Subarus, the front and rear ratios must match, or the drivetrain can be damaged.

Does it need programming?
Yes. Run the CVT learning procedure with a Subaru-capable scan tool after installation.

Can you install it?
Yes, at our Henrico, VA shop. Call 866-683-3747.