JDM 2003–2007 NISSAN MURANO RE0F09A / JF010E CVT TRANSMISSION – VQ35DE 3.5L FWD

Replace your worn or failed Murano CVT with this low-mileage JDM Nissan RE0F09A / JF010E continuously variable transmission from J-Spec Auto Sports.

This transmission targets compatible 2003, 2004, 2005, 2006, and 2007 Nissan Murano models equipped with the VQ35DE 3.5L V6 and front-wheel drive / 2WD.

Nissan identifies this transmission family as:

RE0F09A

while Jatco identifies the corresponding CVT family as:

JF010E

Both identifiers are important because vehicle owners, repair shops, transmission specialists, Google, and AI search systems may use either code when searching for a replacement Murano CVT.

The primary product relationship is:

Nissan Murano → 2003–2007 → VQ35DE 3.5L V6 → RE0F09A / JF010E → CVT → FWD / 2WD

QUICK DETAILS

• Manufacturer: Nissan / Jatco
• Vehicle: Nissan Murano
• Years: 2003–2007
• Engine Code: VQ35DE
• Engine Size: 3.5L
• Engine Configuration: V6
• Nissan Transmission Code: RE0F09A
• Jatco Transmission Code: JF010E
• Transmission Type: CVT
• Drivetrain: FWD / 2WD
• Not Intended For: AWD applications without verified interchange
• CVT Fluid: Genuine Nissan CVT Fluid NS-2
• Condition: Used OEM JDM / Low Mileage
• Origin: Japan
• Item ID: 330
• SKU: MT145-1
• Warranty: 90 Days
• Shipping: Nationwide Freight

RE0F09A / JF010E TRANSMISSION IDENTIFICATION

The first-generation Murano uses Nissan/Jatco CVT technology designed to handle the output of the VQ35DE 3.5L V6.

The two most important transmission identifiers are:

Nissan Designation: RE0F09A

Jatco Designation: JF010E

These are not two unrelated transmissions.

Instead, RE0F09A and JF010E are Nissan and Jatco identification systems associated with the same general CVT family.

However, that does not mean every RE0F09A or JF010E from every vehicle is automatically interchangeable.

Production date, drivetrain, Nissan part number, electronics, valve body, sensors, connectors, and vehicle application still matter.

VQ35DE 3.5L V6 APPLICATION

This transmission targets Nissan’s:

VQ35DE 3.5L V6

engine application.

Important search relationships include:

• VQ35DE transmission
• Murano VQ35 transmission
• 3.5L Murano CVT
• RE0F09A VQ35DE
• JF010E VQ35DE

Nevertheless, engine compatibility alone is not enough to determine interchange.

Always verify the complete transmission and drivetrain configuration.

FWD / 2WD TRANSMISSION

This particular listing is specifically for:

FWD / Front-Wheel Drive / 2WD

That distinction should remain highly visible throughout the product page.

Do not describe Item 330 as a generic Murano transmission because J-Spec also stocks AWD Murano CVTs.

Recommended structured attribute:

Drivetrain: FWD / 2WD

NOT FOR AWD MURANO APPLICATIONS

This listing should not be confused with an AWD Murano CVT.

Although FWD and AWD Murano transmissions may belong to the same broader Nissan/Jatco CVT family, drivetrain configuration matters.

Therefore:

FWD / 2WD = This Listing

AWD = Separate Transmission Application

Customers with AWD Muranos should not order Item 330 unless complete interchange has been positively verified.

2003–2007 NISSAN MURANO COMPATIBILITY

Potential applications include compatible:

2003 Nissan Murano 3.5L V6 FWD

2004 Nissan Murano 3.5L V6 FWD

2005 Nissan Murano 3.5L V6 FWD

2006 Nissan Murano 3.5L V6 FWD

2007 Nissan Murano 3.5L V6 FWD

All applications require complete transmission verification.

IMPORTANT FITMENT VERIFICATION

Do not purchase this CVT based only on:

2003–2007 Nissan Murano 3.5L

Before ordering, verify:

• VIN
• Model year
• Production date
• FWD / 2WD drivetrain
• Original transmission identification
• Nissan OEM part number when available
• Electrical connectors
• Sensors
• Valve-body configuration
• Electronic configuration
• Transmission case
• Mounting points
• Axle openings
• Cooler fittings

For the safest fitment verification, provide:

VIN + Model Year + FWD Confirmation + Original Transmission Identification + Clear Photos of Original Transmission and Connectors

WHAT IS INCLUDED?

The sale includes the CVT transmission assembly shown in the actual Item 330 product photographs.

Any attached:

• Sensors
• Wiring
• Brackets
• Mounts
• Cooler fittings
• Electronic components
• Hardware
• Torque converter

should only be considered included when specifically identified or clearly shown as part of the sale.

Always review the actual product photographs before ordering.

KEEP YOUR ORIGINAL TRANSMISSION

Do not discard the original transmission until the JDM replacement has been successfully installed and road-tested.

The original unit may be needed for:

• Sensors
• Wiring
• Brackets
• Mounts
• Cooler fittings
• Electrical components
• Valve-body-related components
• Hardware

Depending on the exact interchange, certain external components may need to transfer.

JDM-TO-USDM COMPATIBILITY

A JDM Nissan CVT should not automatically be described as completely plug-and-play simply because it belongs to the RE0F09A / JF010E family.

Before installation, place the replacement and original transmissions next to each other.

Compare:

• Transmission case
• Identification numbers
• Electrical connectors
• Sensors
• Valve-body electronics
• Mounting locations
• Axle openings
• Cooler fittings
• External brackets

Transfer compatible original components when necessary and appropriate.

GENUINE NISSAN NS-2 CVT FLUID

This application requires:

Genuine Nissan CVT Fluid NS-2

or an approved fluid specifically meeting the required Nissan NS-2 specification.

Do not use conventional automatic transmission fluid.

Do not use:

• Standard Dexron ATF
• Differential oil
• Manual transmission fluid
• Nissan NS-3 unless specifically approved for the application
• Generic universal fluid without confirmed NS-2 compatibility

Using the wrong fluid can affect hydraulic operation, belt/pulley performance, lubrication, temperature control, and CVT operation.

DO NOT MIX CVT FLUIDS

When servicing the replacement transmission, avoid unnecessary mixing of incompatible fluids.

Drain the donor fluid as appropriate and refill using the correct NS-2 specification.

Most importantly, the cooler and cooler lines must also be serviced before operating the replacement transmission.

CVT COOLER AND LINE FLUSH

This is one of the most important installation procedures for a replacement Murano CVT.

A failed original transmission can contaminate the cooling circuit with:

• Metal particles
• Friction material
• Debris
• Degraded CVT fluid

Therefore:

• Flush the transmission cooler lines.
• Inspect the cooler.
• Verify unrestricted fluid flow.
• Remove contaminated fluid.
• Replace a contaminated cooler if it cannot be properly cleaned.

Installing a replacement CVT onto a contaminated cooling system can introduce debris directly into the replacement transmission.

INSPECT THE CVT PAN

Before installation, inspect the transmission pan when appropriate.

Check for:

• Excessive metal
• Friction material
• Contamination
• Damaged magnets
• Sludge

Additionally, clean the pan and service the filter/strainer according to the correct Nissan procedure.

INSPECT ACCESSIBLE SEALS

While the CVT is outside the vehicle, inspect:

• Front / converter seal
• Axle seals
• Selector-shaft seal
• Cooler-line seals
• Pan gasket

Replace questionable accessible seals before installation.

Doing so is generally easier while the transmission is outside the vehicle.

TORQUE CONVERTER INSTALLATION

If a torque converter is supplied or reused, inspect it carefully.

Check:

• Converter hub
• Splines
• Pilot
• Seal surface
• Mounting pads
• Overall condition

Most importantly, make sure the torque converter is fully seated into the transmission before mating the CVT to the engine.

Never use bellhousing bolts to pull the transmission against the engine.

Improper converter installation can damage the transmission pump.

VERIFY ELECTRICAL CONNECTORS

Compare every electrical connection before installation.

Check:

• Connector shape
• Pin configuration
• Harness routing
• Sensors
• Range switch
• Speed sensors
• Valve-body connections

Even when two transmissions belong to the same family, electronic differences can affect compatibility.

CVT CONTROL / RELEARN PROCEDURES

After installation, perform all Nissan-required CVT initialization, calibration, learning, or adaptation procedures applicable to the vehicle and transmission configuration.

Depending on the repair, this may involve:

• TCM diagnosis
• Clearing stored transmission data
• CVT learning procedures
• Idle learning
• Calibration verification
• Road-test adaptation

A professional scan tool capable of communicating with the Nissan transmission control system is strongly recommended.

CHECK FOR TCM CODES BEFORE INSTALLATION

Before removing the failed transmission, scan the vehicle and document all transmission-related diagnostic trouble codes.

After installation:

• Clear appropriate stored codes.
• Start the vehicle.
• Recheck the TCM.
• Confirm communication.
• Monitor CVT data.
• Road-test carefully.
• Scan again afterward.

Do not assume every CVT-related fault is caused by the mechanical transmission.

INITIAL STARTUP PROCEDURE

After installation:

• Confirm correct NS-2 CVT fluid.
• Start the engine.
• Allow fluid to circulate.
• Slowly move through each selector position.
• Confirm Reverse engagement.
• Confirm Drive engagement.
• Monitor transmission temperature.
• Inspect for leaks.
• Recheck fluid level using the correct Nissan procedure.

Avoid hard acceleration during the initial test.

MULTIPLE HEAT CYCLES

Run the replacement CVT through multiple controlled heat cycles.

As the transmission, torque converter, and cooler circuit fill completely, the fluid level may change.

Therefore:

• Monitor CVT temperature.
• Recheck fluid level.
• Inspect cooler connections.
• Check axle seals.
• Inspect the pan.
• Monitor engagement quality.

Use the correct Nissan fluid-level procedure.

INITIAL ROAD TEST

Begin with a conservative road test.

Monitor:

• Park
• Reverse
• Neutral
• Drive
• Initial engagement
• Low-speed acceleration
• Moderate acceleration
• CVT ratio changes
• Engine RPM
• Shudder
• Slipping
• RPM flare
• Hesitation
• Vibration
• Transmission noise
• Temperature
• Warning lights
• Fluid leakage

Afterward, scan the TCM again for stored or pending faults.

COMMON MURANO CVT FAILURE SYMPTOMS

A failing Murano CVT may exhibit:

• Shuddering
• Slipping
• Delayed engagement
• RPM flare
• Hesitation
• Loss of acceleration
• Abnormal whining
• Overheating
• Limp mode
• Transmission warning lights
• CVT-related diagnostic codes
• No movement

However, similar symptoms can also result from:

• Incorrect fluid level
• Wrong CVT fluid
• Valve-body problems
• Sensors
• Wiring
• TCM issues
• Cooler restriction
• Engine-related problems

Therefore, properly diagnose the vehicle before replacing the transmission.

WHY CHOOSE THIS RE0F09A / JF010E CVT?

Item 330 offers a low-mileage JDM replacement option for compatible first-generation Nissan Murano FWD applications.

Key features include:

• Genuine Nissan/Jatco JDM CVT
• RE0F09A Nissan transmission family
• JF010E Jatco designation
• VQ35DE 3.5L V6 application
• FWD / 2WD configuration
• Low-mileage Japanese import
• Actual inventory photographs
• Individual Item ID
• 90-day limited warranty
• Nationwide freight shipping

WHY BUY FROM J-SPEC AUTO SPORTS?

J-Spec Auto Sports specializes in Japanese engines, transmissions, and drivetrain components.

Customers benefit from:

• Actual inventory photographs
• Transmission-code identification
• Individual inventory tracking
• Nissan drivetrain experience
• Nationwide freight shipping
• Local Richmond / Henrico pickup
• Installation availability
• Limited warranty coverage

INDIVIDUAL INVENTORY INFORMATION

Vehicle: Nissan Murano

Years: 2003–2007

Engine: VQ35DE 3.5L V6

Nissan Transmission Code: RE0F09A

Jatco Transmission Code: JF010E

Transmission: CVT

Drivetrain: FWD / 2WD

CVT Fluid: Genuine Nissan NS-2

Item ID: 330

SKU: MT145-1

Condition: Used OEM JDM / Low Mileage

Warranty: 90 Days

90-DAY LIMITED WARRANTY

Item 330 carries a 90-day limited warranty, subject to J-Spec Auto Sports’ current warranty terms and installation requirements.

For warranty documentation, retain records for:

• Correct Nissan NS-2 CVT fluid
• Cooler and line service
• Filter/strainer service where applicable
• Seal inspection
• Torque-converter installation
• TCM scan
• CVT initialization/relearn procedures
• Professional installation

FREQUENTLY ASKED QUESTIONS

What transmission is this?

This is a Nissan/Jatco RE0F09A / JF010E continuously variable transmission.

What vehicles does it fit?

It targets compatible 2003–2007 Nissan Murano 3.5L V6 FWD / 2WD applications.

What engine does it work with?

VQ35DE 3.5L V6

What does RE0F09A mean?

RE0F09A is Nissan’s designation associated with this CVT family.

What does JF010E mean?

JF010E is Jatco’s designation commonly associated with this Nissan CVT family.

Is RE0F09A the same as JF010E?

They identify the same general Nissan/Jatco CVT family. However, individual part numbers, electronics, production dates, and applications must still be verified.

Is this FWD?

Yes.

This listing is for:

FWD / 2WD

Is this AWD?

No.

Do not purchase this FWD transmission for an AWD Murano without positively verified interchange.

Is this a conventional automatic transmission?

No.

It is a CVT / Continuously Variable Transmission.

How many gears does it have?

A CVT does not use a conventional fixed number of forward gears like a traditional 4-speed, 5-speed, or 6-speed automatic.

Therefore, the WooCommerce Gears field should say:

CVT

What CVT fluid does it use?

Use Genuine Nissan CVT Fluid NS-2 or the exact approved equivalent meeting Nissan’s required NS-2 specification.

Can I use regular ATF?

No.

Do not substitute conventional automatic transmission fluid for the required CVT fluid.

Should the cooler lines be flushed?

Yes.

Properly service the cooler and cooler lines before operating the replacement CVT.

Does the transmission need a relearn?

Perform all Nissan-required CVT initialization, calibration, learning, and adaptation procedures applicable to the vehicle after installation.

Should I keep my original transmission?

Yes.

Keep it until installation and road testing are complete because sensors, brackets, wiring, electronic components, or other external parts may need to transfer.

Is the torque converter included?

Verify the actual Item 330 photographs and written inventory before assuming the torque converter is included.

Is this the actual transmission pictured?

The product should be represented using the actual Item 330 inventory photographs.

Is this transmission rebuilt?

No.

Unless specifically stated otherwise, it is a used OEM JDM Nissan/Jatco transmission imported from Japan.

Does it have a warranty?

Yes.

Item 330 carries a 90-day limited warranty.

ORDER ITEM 330 – NISSAN MURANO RE0F09A / JF010E FWD CVT

Replace your worn or failed CVT with this low-mileage JDM 2003–2007 Nissan Murano RE0F09A / JF010E CVT transmission.

Vehicle: Nissan Murano

Years: 2003–2007

Engine: VQ35DE 3.5L V6

Transmission Code: RE0F09A

Jatco Code: JF010E

Transmission: CVT

Drivetrain: FWD / 2WD

CVT Fluid: Nissan NS-2

Item ID: 330

SKU: MT145-1

Warranty: 90 Days

Before ordering, verify the VIN, FWD drivetrain, production date, original transmission identification, Nissan part number, electrical connectors, sensors, valve-body/electronic configuration, mounting points, axle openings, and cooler fittings.