2011–2012 Subaru Legacy 2.5i CVT Transmission, TR690JHBAA, 3.70

If you’ve already checked the tag on your old transmission, you know exactly what you need. This JDM Subaru Legacy 2.5i CVT transmission is a TR690JHBAA with a 3.70 final drive. In other words, it’s the same Lineartronic unit Subaru fitted to the 2011–2012 Legacy 2.5i with AWD. As a result, it’s a straightforward, factory-correct replacement.

Spec Sheet

• Code: TR690JHBAA
• Type: Subaru Lineartronic CVT
• Final drive: 3.70
• Drive: all-wheel drive
• Engine: 2.5L EJ253 (2.5i)

Three-Step Fit Check

1. Confirm your car is a 2010–2012 Legacy 2.5i with the CVT.
2. Check that the code tag on your current transmission reads TR690JHBAA.
3. Make sure your final drive is 3.70, so the front and rear AWD ratios match.

If any step is unclear, send us your VIN or a photo of your tag, and we’ll confirm for you. Also, Outback 2.5i owners from the same years can use this check to see whether the unit matches their car.

Why Buy JDM?

Japan’s strict shaken inspection rules push many owners to retire their cars early. Consequently, JDM transmissions often come from lower-mileage vehicles. In addition, a used JDM CVT costs far less than a new or rebuilt one.

Installation Notes

Use only genuine Subaru CVT fluid, and flush the cooler lines if your old unit failed internally. Afterward, run the CVT learning procedure with a Subaru-capable scan tool, then road test the car. For background on this generation, see the fifth-generation Subaru Legacy overview.

Professional Installation Available

Want it done right the first time? J-Spec Auto Sports installs the engines, transmissions and parts we sell at our shop in Henrico, Virginia, near Richmond. We’ll install the CVT, complete the learning procedure and road test your Legacy. To get a quote or book a time, schedule an appointment or call 866-683-3747.

Shipping

We drain this CVT, cap it and strap it to a pallet, then ship it by freight anywhere in the continental US. Local customers can also pick it up at our Henrico shop.

FAQ

Will this fit my 2012 Legacy 2.5i?
Yes, if your car has the CVT with a 3.70 final drive.

Does it fit a 2010 Legacy too?
Yes. The TR690JHBAA was used from 2010 to 2012. Check your code tag.

What about my Outback 2.5i?
Possibly. Match the code and final drive, or send us your VIN.

Does it need programming?
Yes. Run the CVT learning procedure with a Subaru-capable scan tool.

Can you install it?
Yes, at our Henrico, VA shop. Call 866-683-3747.